The product makes
abnormal noise
The floor brush doesn't
spray water
Water is sprayed through
the air outlet
Water is sprayed through
the air outlet
7. TECHNICAL SPECIFICATIONS
Product reference: 05715
Product: Conga Popstar 29600 Aqua&Collect
Inlet rated power: 215 W
Adapter: 100-240 V, 50-60 Hz
Battery capacity: 2500 mAh
Charge time: 5 hrs approx.
Water tank: 400 mL
Sewage tank: 350 mL
Made in China | Designed in Spain
8. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
1.
The suction port is blocked
2. The sewage in the sewage tank has
reached the maximum capacity and
the float moves
1.
No water in the water tank
2. The water spray button is not
pressed
3. The water tank is not assembled in
place
1.
After the filtering HEPA is cleaned
and used, it is not air-dried
2. The water in the sewage tank has
exceeded the maximum limit
1.
No filter is installed
2. No float is installed
3. The filter is not dried after cleaning
4. The sewage tank has reached the
maximum capacity value
1.
2. Clean the sewage
1.
2. Press the water
3. Re-install the water
1.
2. Take out the sewage
1.
2. Install the float
3. The filter must be
4. Clean the sewage
CONGA POPSTAR 29600 AQUA&COLLECT
ENGLISH
Clean the suction
port
tank
Add water to the
water tank
spray switch
tank in place
Dry the HEPA filter
after use
tank, drain the
sewage and use the
sewage tank
Install the filter
dried after cleaning
tank
45