Operation - cecotec CONGA POPSTAR 29600 AQUA&COLLECT Manual De Instrucciones

Charging function
After installing the handle and the battery pack on the machine body, align the whole machine
with the charging base, insert the charger port into the charging base, insert the charger plug
into the AC outlet, and the working indicator lights up in red to indicate normal charging.
Fig. 4
Disassembly and assembly of clean water tank and sewage tank
To remove the water tank or sewage tank, hold the machine body with one hand, hold the water
tank handle with the other hand, and press the water tank release button with your thumb to
remove the water tank or sewage tank diagonally. To install the water tank or the sewage tank,
first put the bottom of the clean water tank or the sewage tank against the flanged edge of the
tray and press the clean water tank or sewage tank with your hand. It will click into place and
the installation will be completed.
Fig. 5
1. Sewage tank
2. Water tank
Removal and installation of roller cover and roller body
To remove the rolling brush cover, first put your finger on the edge of the rolling brush cover
and push the rolling brush cover up and rotate to remove the rolling brush cover. To release
the rolling brush body, use your fingers to pull up the left rolling brush handle. It will click
into place. Then align the buckle at both ends of the rolling brush cover with the grooves at
both ends of the floor brush, and then press the rolling brush cover. The installation will be
completed after hearing a click.
Fig. 6

4. OPERATION

Filling the water tank
1. Gently press the water tank release button on the water tank and remove the water tank.
2. After the water tank is turned upside down, unscrew the cap in the direction as shown,
and pour clean water up to the water level line.
3. Tighten the screw cap of the water tank to ensure that it is tight without looseness and
there is no water leakage.
4. Install the water tank into the machine body. It will click into place indicating it is properly
installed.
Fig. 7
Using the electric mop
1.
The On/Off button is located above the handle.
CONGA POPSTAR 29600 AQUA&COLLECT
ENGLISH
41