Detail trimming attachment
• Use the attachment for trimming narrow areas and for
detailed trimming.
Place the blade horizontally
against the skin and
towards the beard line trim
slowly.
Trim gradually from the
ends by bringing the blade
in contact with the skin.
Maintenance
Cleaning
• Clean the main body and the blade after each use.
(If not cleaned, the motion will become poor and the
sharpness will worsen.)
• Do not use thinner, benzine, alcohol or other
chemicals. Doing so may cause failure, cracking or
discoloration of the main body. Wipe the main body
only with a soft cloth slightly dampened with tap water
or soapy tap water.
• Make sure that the main body is turned off.
• Remove the main body from the AC adaptor.
14
PB016970 - ER-GD6151
_(01GB)_12-04-18.indd 14
►With water
ER-GD61
1. Remove the
2. Run water down the
To remove light dirt
1. Remove the
attachment and turn
the main body on.
(See page 12.)
2. Clean the main body,
water inlet at the back
of the main body, rinse
thoroughly for
approximately 20
seconds, and then turn
the main body off.
• Shake up and down several times to remove the
water.
• Be careful not to hit the main body on the sink or
any other object while draining the water. Failure
to do so may cause malfunction.
To remove heavy dirt
attachment and blade.
(See pages 12 and 15.)
the blade and the
attachments with
running water.
ER-GD61
2018/12/4 9:33:35