How To Prepare A Cappuccino Coffee Using The Steam Tube; Cleaning Instructions; Descaling - Saeco SIN 007 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
26
STEAMING FUNCTION - CLEANING INSTRUCTIONS - DESCALING
8
HOW TO PREPARE A CAP-
PUCCINO COFFEE USING
THE STEAM TUBE
• If the machine is not already on, turn it
on at the main switch (3) which will light
up.
• Press the steam switch (5) which will light
up. The "machine on" light (9) will turn
off.
• When the "machine on" light (9) comes
back on, the machine steam tube is ready
to use.
Point the steam tube ("Pannarello")
over the drip tray and open the "hot
water/steam" knob (6) for a few seconds
to clear the tube of any excess water. Wait
for a few more seconds for steam to flow
out.
• Close the knob (6).
Immerse the tube in the liquid to be
heated and open the knob (6).
Move the container gently up and down
to ensure that the liquid is heated right
through.
• When the liquid has reached the required
temperature close the knob (6) and turn
off the "steam" switch (5).
To make a cappuccino heat milk
using the method explained
above.
• Proceed following the priming instructions
found in par. 4.5.
• When you have finished using the steam
tube clean with a damp cloth.
9

CLEANING INSTRUCTIONS

Before cleaning the machine, let it cool
All manuals and user guides at all-guides.com
down and unplug it.
• Do not immerse the coffee maker in water
• Do not use sharp objects or abrasive
• After heating milk, release a small
• Do not dry the machine and/or any of its
• Clean the "Pannarello" located over the
"Pannarello" may come loose during use.

10 DESCALING

the appliance is inevitable.
If you notice a reduction in the water
capacity of the appliance it is necessary to
descale the machine.
and do not put any of the components in
a dishwasher.
chemical products (solvents) to clean the
machine.
Clean the water tank and fill it with
fresh water daily.
quantity of hot water to clean out the
steam tube and wipe the outside of it with
a damp cloth.
Use a damp cloth to wipe down the
appliance.
Clean the filter holder as follows:
• Remove the filter, place it in hot water
and wash it carefully.
• Clean the inside of the filter holder.
parts using a microwave and/or
conventional oven.
steam tube, if it is fitted on your machine.
To do this, unscrew the ring nut, remove
the "Pannarello" from the steam tube and
take off the external casing.
Rinse the "Pannarello" under running
water and then put it back together
again.
The ring nut must be closed
properly as otherwise the
The formation of lime on the inside of
Tabla de contenido
loading

Tabla de contenido