Possible Solution - Bartscher K7ECI05VV Manual Del Usuario

Safety rules for the user
The heated area (glass ceramic) heats consequently to the heating of the bottom of the
x
pot. In order to avoid burnings, do not touch the heated area.
To avoid any overheating of the bottom side of an empty pot, do not heat unintentionally the
x
bottom side.
During a simultaneously cooking with different pots one must take care that the handles of
x
the pots do not touch and that they stay out of the inducted magnetic field. They can sensibly
heat depending on the material they are made of!
The bottom sides of the pots must always remain at a certain distance between each other
x
and shouldn't graze.
Danger of burning! We suggest to use an athermic glove.
x
Switch off the cooking area when one take off the pot for a while. This way the machine
x
avoid to activate itself automatically as soon as one container is placed on the cooking zone.
This way the user avoid an unintentional heating; it means that if he wants to use the
induction cooker, he must activate the heating process by rotating the knob clockwise.
Do not interpose paper, carton, clothes etc.. between the bottom of the pot and the heated
x
area because they might set on fire.
Since the metal objects are heated very quickly, do not place on the working surface any
x
other metal object different than pots (for instance closet cans, aluminium foils, table ware,
jewels, clocks etc...)
Do not place any credit card, phone card, cassettes or other magnetizing objects on the
x
induction surface.
The induction system is equipped with its aeration and cooling system. Avoid any object to
x
obstruct the aspiration and exhaust holes. This might cause an overheating and consequently
the switching off of the machine.
Avoid any liquid to get into the machine and that any water or food get out of the pots. Do
x
not clean the cooking surface with a water jet.
If it occurs that the cooking surface breaks, turn off the cooking unit and unplug it from the
x
electric feeding. Don't touch any part/component inside the machine.
Do not ever clean with a water jet.
x
Do not touch any part inside the machine.
x
Working failures
If for some reason the machine shouldn't turn on or it turns off during the operation time, check
that the electric feeding and the controls are placed in a correct way, if everything is right contact
the technical assistance
.
concerning the induction models:
Whenever the red lamp should light, check if there is a pot suitable for induction. If it is the
green lamp to lighten, than it mean there is a technical problem in the machine.
As follows there a table with the most common failures and the possible solutions.
Failure
Green lamp off / red
lamp off
Problem
There's no heating
Possible cause
Loss of electric feeding
Pag. 39/68

Possible solution

Check the connection to
the electric feeding