Product Use - Nuna norr Manual De Instrucciones

DO NOT make any alterations or additions
to the device without the approval of the
type approval authority. The user should
follow closely the installation instructions
provided by the enhanced child restraint
manufacturer.
DO NOT
use this enhanced child restraint if it
has damaged or missing parts.
DO NOT have your child in large/oversized
clothes because this will prevent your child
from being properly and securely fastened
by the shoulder harness straps and the
crotch strap between the legs.
DO NOT
place any objects in the load leg area in
front of your enhanced child restraint.
DO NOT
use any load bearing contact points
other than those described in the instructions
and marked on the enhanced child restraint.
NEVER
use a second-hand enhanced child
restraint or an enhanced child restraint whose
history you do not know because it may have
structural damage that compromises your child's
safety.
NEVER
use ropes or any other substitutes to
secure enhanced child restraint in vehicle or to
secure child into enhanced child restraint.
The child restraint may not fit in all approved
vehicles when used in one of these positions.
9
NORR instructions

Product Use

DO NOT install this enhanced child restraint on
vehicle seats that face sideways or rearward with
respect to the moving direction of the vehicle. (1)-1
DO NOT use the rearward facing enhanced child
restraint systems in seating positions where there is
an active frontal airbag installed. Death or serious
injury may occur. (1)-2 Please reference vehicle
owner's manual for more information.
It is recommended to install this enhanced child
restraint on the rear vehicle seat. (1)-3
This enhanced child restraint is suitable for vehicle
seats with i-Size ISOFIX anchor points. (2)
DO NOT install this enhanced child restraint on
vehicle seats unstable during installation.
Installation
1
Unfold the load leg from the storage
compartment. (3)
2
Fit the ISOFIX guides into the ISOFIX anchor
points. (4) The ISOFIX guides can protect the
surface of the vehicle seat from being torn. They
will also guide the ISOFIX connectors.
3 Press the ISOFIX adjustment button on either side
of the base, then pull out the ISOFIX connectors.
(5)
4
Line up the ISOFIX connectors with the ISOFIX
guides, and then click both ISOFIX connectors
into the ISOFIX anchor points. (6)
10
NORR instructions