Product Use - Nuna rebl plus Manual De Instrucciones

Product Use

DO NOT install this child restraint on vehicle seats that
face sideways (1) or rearward (1) with respect to the
moving direction of the vehicle.
DO NOT place rear-facing child restraint on front
seat with air bag. Death or serious injury may occur.
(1) Please reference vehicle owner's manual for more
information.
It is recommended to install this child restraint on the
rear vehicle seat. (1)
This child restraint is suitable for vehicle seats with
i-Size ISOFIX anchor points. (2)
DO NOT install this child restraint on vehicle seats
unstable during installation.
Installation
1
- Unfold the load leg from the storage compartment.
(3)
2
- Fit the ISOFIX guides into the ISOFIX anchor points.
(4) The ISOFIX guides can protect the surface of the
vehicle seat from being torn. They will also guide
the ISOFIX connectors.
3
- Press the ISOFIX release button on either side of
the base, then pull out the ISOFIX connectors. (5)
4
- Line up the ISOFIX connectors with the ISOFIX
guides, and then click both ISOFIX connectors into
the ISOFIX anchor points. (6)
13
REBL plus Instructions
Make sure that both ISOFIX connectors are securely
attached to their ISOFIX anchor points. There should
be two audible clicks and the colors of the indicators
on the both ISOFIX connectors should be completely
green. (6)-1
Check to make sure the child restraint is securely
installed by pulling on the both ISOFIX connectors.
5
- There are 9 adjustable positions for ISOFIX. Press
the ISOFIX release button and push the base back
against the vehicle seat until tight.
6
- After placing the child restraint on the vehicle
seat, extend the load leg to floor. (7), The load leg
indicator will show green when installed correctly,
red means it is installed incorrectly. (7)
The load leg has 24 positions. When the load leg
indicator shows red this means the load leg is in the
wrong position.
Make sure the load leg is secure by pressing down
on the front of the child restraint.
To shorten the load leg, squeeze the load leg
release button and pull the load leg upwards.
7
- To remove the child restraint, press the ISOFIX
release button (5)-1 and pull the base away from
the seat, then while squeezing the button and
secondary lock on the ISOFIX connectors remove
from the vehicle. (8)
8
- Press the ISOFIX release button to store the ISOFIX.
(9)
14
REBL plus Instructions