Product Use; Recline Adjustment - Nuna myti Manual Del Usuario

Product Use

Recline Adjustment

1
- Squeeze the recline adjustment button (5), to
adjust the enhanced child restraint to the proper
position. The recline angles are shown as (6).
2
- There are 3 recline positions for forward facing
mode. (6)
Please confirm that the backrest adjustment
engaged in place. (7)
The child restraint may not fit in all approved
vehicles when used in one of these positions.
Height Adjustment for Head Support
1
- Please adjust the head support to proper height
according to the child's height.
2
- Squeeze the head support adjustment lever,
meanwhile pull up or push down the head
support until it snaps into one of the 9 positions.
(8)(9)
Before adjusting the head support height have
your child lean forward slightly.
Side wings are able to gradually open while the
head support is adjusted to the 4
The child restraint may not fit in all approved
vehicles when used in one of these positions.
13
MYTI Instructions
position. (10)
th
76cm-105cm/9kg-19.5kg
With ISOFIX system + top tether + harness buckle
15 months to 4 years
1
- If required attach the ISOFIX guides onto the
vehicle ISOFIX bars. (11)
Please recline the seat to the most upright
position before assembling child restraint.
2
- Open the tether storage cover, and place the top
tether behind the vehicle seat. (12)(13)
3
- Extend the ISOFIX connectors by depressing on
the release button whilst pulling on the connector.
(14)
There are 11 adjustable positions for ISOFIX.
4
- Make sure that both ISOFIX connectors are
securely attached to their ISOFIX anchor points.
The colors of the indicators on both ISOFIX
connectors should be completely green. (15)
5
- Press the ISOFIX release button and push the
base back against the vehicle seat until tight. (16)
6
- To extend top tether for use, press button on
tether adjuster and pull to lengthen. (17)
7
- Connect the tether hook securely to the
anchorage fitting. (18)
14
MYTI Instructions