3M PROTECTA CABLOC Manual Del Usuario página 6

FORWORD
EN
This instruction manual describes the use and maintenance of the Cabloc Vertical Cable Safety System and Cabloc Detachable
Cable Sleeve. It should be used as part of an employee training program as required by CE and must be kept with the
equipment.
Installers must read and follow the manufacturer's instructions for safety equipment used with this system.
Follow these instructions for proper use, inspection, and maintenance of this equipment before installing this equipment.
If this product is resold outside the original country of destination, the reseller must provide these instructions in the
language of the country in which the product will be used.
Before using this equipment, fi nd the product identifi cation information on the installation and service label and record it in
the Inspection & Maintenance Log in this manual.
Sleeve and system must be inspected after a fall. If the energy absorber/fall indicator on the sleeve is deployed (Figure 15,
example 2), the sleeve must be removed from service. If there are any nicks or kinks in the ladder cable, the cable must be
inspected by a competent person prior to use.
GLOSSARY REFERENCES
Numbered Glossary References on the front cover of this instruction reference the following items:
User Instructions.
1
Cabloc Vertical Cable Safety Systems
2
Standards.
3
Number of notifi ed body that performed CE test.
4
Number of notifi ed body checking the manufacture of this PPE.
5
1.0 APPLICATIONS
1.1 PURPOSE: Cabloc Vertical Cable Safety Systems (Figure 1) are designed to protect a worker in the event of a fall while
climbing fi xed ladders or similar climbing structures. The Cabloc Detachable Cable Sleeve (Figures 1 and 2) attaches to
a Cabloc Vertical Cable Safety System. The sleeve is designed to arrest the fall of a worker in the event of a fall while
climbing a fi xed ladder. The Cabloc Detachable Cable Sleeve is not intended to be used for material handling. Use only
for intended purpose.
Cabloc Detachable Cable Sleeve models covered by this instruction:
Part Number
6180200
6180201
Cabloc Systems that use the Cabloc Detachable Cable Sleeve:
System Instruction Number
5903940
Cabloc Vertical Cable Safety System Components, Figure 1
A Top Bracket
B Cable
C Cable Sleeve
Cabloc Detachable Cable Sleeve Components, Figure 2 ("i" is Back of Sleeve, "ii" is Front of Sleeve)
A
Cable (not component)
B
Anti-Inversion Pawl
C
Sleeve Body Back
Cable types approved for use with the Cabloc Detachable Cable Sleeve
Cable Part Number
AC300SXX
AC300GXX
1.2 LIMITATIONS: The Cabloc Detachable Cable Sleeve must be used with a 3M Fall Protection approved ladder safety
system. Use only a 8 mm (5/16 inch) diameter solid core cable with the Detachable Cable Sleeve. The ladder safety
system must have a maximum angle of 15° from vertical. The ladder safety system may be confi gured with or without
a top, in-line energy absorber. Both confi gurations have been tested and approved for use with the Cabloc Detachable
Cable Sleeve.
Standard
CE (EN353-1:2014+A1:2017)
CE (EN353-1:2014+A1:2017)
System Type
Vertical
D Cable Guide
E System Tag
F Bottom Bracket
D Handle/Energy Absorber/Fall Indicator
E Sleeve Body, Front
F Front Label
Cable, 8mm 7 x 19 Stainless Steel Cable by length.
Cable, 8mm 6 x 19 Galvanized Steel Cable by length.
Rigid anchor line, including Detachable Cable Sleeve,
6
maximum number of system users.
Minimum user weight, excluding tools and equipment,
7
is 40 kg (88 lbs) and maximum user weight, including
tools and equipment, is 140 kg (310 lbs).
8
Read User Instructions.
9
Warning symbol.
Description
Cabloc Detachable Cable Sleeve with ZP Carabiner
Cabloc Detachable Cable Sleeve with SS Carabiner
System Description
Cabloc Vertical Cable Safety System
G Frontal D-Ring
H Full Body Harness
H
DESCRIPTION
6
G Release Pin J
Upper Cam K
I This way UP Arrow
Carabiner
ID Label