Tabla de contenido
Idiomas disponibles
Idiomas disponibles
To avoid electric shock, be sure the thermocouple has been
removed before changing to another measurement function.
5.6
Continuity Measurements
Measurements must not be realised in live circuits. Capaci-
tors must be discharged.
Do not realise measurements if the battery compartment is
open.
In order to realise continuity test it is necessary to realise the
following actions:
Insert the black test lead into the negative COM terminal and
the red test lead into the V· ·°C·°F·Hz positive terminal,
Set the function switch to the
Use the MODE button to select continuity "
icons will change when the MODE button is pressed,
Touch the test probe tips across the circuit or component un-
der test,
If the resistance is < 40, a tone will sound.
5.7
Diode Measurements
In order to realise diode test it is necessary to realise the
following actions:
Insert the black test lead banana plug into the negative COM
jack and the red test lead banana plug into the V· ·°C·°F·Hz
positive jack,
36
WARNING:
WARNING:
WARNING:
CMP-1006 – USER MANUAL
position,
)
)
)
)"
. The display
)
)
Capítulos
Tabla de contenido
