Lcd Backlight Button; Automatic Power Off; Battery Replacement - Sonel CMP-1006 Manual De Uso

5.11

LCD Backlight Button

The LCD is equipped with backlighting for easier viewing, espe-
cially in dimly lit areas. Press the backlight button to turn the back-
light on. Press again to turn the backlight off. Note that the meter
does have an auto power off feature as described below.
5.12

Automatic Power OFF

In order to conserve battery life, the meter will automatically turn
off after approximately 25 minutes. To turn the meter on again, turn
the function switch to the OFF position and then to the desired func-
tion position.

6 Battery replacement

The CMP-1006 meter is supplied by means of one 9V battery. It
is recommended to use alkaline battery.
When making measurements with a battery's mnemonic on,
one must take into account additional indefinite measure-
ment uncertainty or unstable working of the meter.
Should the test leads be left in the sockets during replace-
ment of the battery, there might be a risk of electric shock
with a dangerous voltage.
In order to replace the battery it is necessary to do the following:

Remove the Phillips head screw that secures the rear battery
door,

Open the battery compartment,

Replace the 9V battery,

Secure the battery compartment.
38
Attention:
WARNING:
CMP-1006 – USER MANUAL