Safety - Sonel CMP-1006 Manual De Uso

The CMP-1006 meter may be operated solely by qualified
and properly authorised personnel for work at electric instal-
lations. Using the tester by unauthorised personnel may lead
to its damage and constitutes a source of a serious risk for
the user.

2 Safety

In order to guarantee proper operation and correctness of the
obtained results it is necessary to observe the following recommen-
dations:

Before commencing operation of the meter please acquaint
yourself thoroughly with the present manual,

The instrument should be operated solely by properly qualified
personnel, who also must be trained regarding the industrial
safety regulations,

Use great care when making measurements if the voltages are
greater than 20VAC rms or 40VDC. These voltages are consid-
ered a shock hazard,

Always discharge capacitors and remove power from the device
under test before performing Diode, Resistance or Continuity
tests,

Before use for non-contact AC voltage measurements, always
test the voltage detector on a known live circuit to verify proper
operation,

It is prohibited to operated the meter:
 If it is damaged and completely or partially out of order,
 If the insulation of the test leads has been damaged,
 If it has been stored for an excessive period of time in inad-
equate conditions (e.g. if it is humid),

Set function switch to the appropriate position before measur-
ing,
WARNING:
CMP-1006 – USER MANUAL
27