Troubleshooting - Fagor 2LF 013 IX Manual De Instrucciones

DISHWASHWER
If you find a problem when using your dishwasher, you will probably be able to solve it by consulting
the following section.
If this is not so, please contact the TECHNICAL ASSISTANCE SERVICE and be ready to provide
as much information as possible.
1
TECHNICAL OR FUNCTIONAL PROBLEMS
When the dishwasher detects a malfunction, it will give you acoustic or visual warnings, depending
on the model.
On the top edge of the dishwasher door, there is a table to identify possible problems.
Display and screen
models.
For these models, the
problem appears on the
display with the letter "F"
followed by a number (from
0 to 9).
Non-display models.
If a malfunction occurs,
the dishwasher will emit
a series of beeps. These
will stop for a few
seconds and then sound
again. The type of
malfunction can be
identified by counting the
number of beeps (1
Door open; 2 ; No
water entering; and so on.
DISPLAY SCREEN
For the dishwasher to stop
beeping, press the start
button.
If you wish to hear the
beeps again, press the
start button.
Depending on the type of
,
malfunction, contact the TAS
and inform them of the
problem.

TROUBLESHOOTING

MALFUNTION
Close the door
Not entering
Not leaking
Flood
Over heating
Not heating
Temp. no detect
No pressure
Not even
Control
The series of beeps and the
malfunction can be cancelled by
pressing the on/off button.
MODEL
MODEL
WITHOUT
WITH
DISPLAY
DISPLAY
Nº BEEPS
F1 1
F2 2
F3 3
F4
4
F5 5
F6 6
F7 7
F8 8
F9 9
F0 10
77