Fagor 2LF 013 IX Manual De Instrucciones página 63

The rinse-aid helps drying and prevents drops of water from clinging to utensils after washing.
The rinse-aid container is located on the inside of the door, next to the detergent container.
It has a 4-position
dispenser for adjusting
the amount of rinse-aid to
the water quality.
If you notice drops of
water on utensils,
increase the position of
the rinse-aid dispenser. If
the utensils have white or
sticky lines, lower the
position.
Once the level of the
a
dispenser has been
set, fill the container
to the top, but do not
overfill it. If this
occurs, clean the
spillage with a cloth.
When do I need to refill the rinse aid?
The dishwasher itself will inform you of when the rinse aid needs refilling. There are three types of
indicator, depending on the model: display window, pilot light or information on the screen.
Depending on the model of
dishwasher, you will be
given an indication of when
the rinse aid needs refilling:
Display window
beside the rinse aid
tank cap. If you can see
a light colour through
the window, it needs
refilling. If you can see
a dark colour, there is
enough rinse aid.
Indicator light on
display models
Indicator on screen
models
RINSE-AID CONTAINER
a
EMPTY FULL
DISPLAY WINDOW
English
DISPENSER
I M P O R T A N T
A greater amount of
rinse-aid does not
necessarily mean
better results. In fact,
too much rinse-aid can
lead to water marks.
PILOT LIGHT SCREEN
63