Disassembly And Disposal - SICK WL18-3 Manual De Operación

9

DISASSEMBLY AND DISPOSAL

9 Disassembly and disposal
10 Maintenance
6
LED indicator/fault pattern /
LED indicator/fault pattern
Signal interruptions when ob‐
ject is detected /
Signal interruptions when ob‐
ject is detected
The sensor must be disposed of according to the applicable country-specific regulati‐
ons. Efforts should be made during the disposal process to recycle the constituent ma‐
terials (particularly precious metals).
SICK sensors are maintenance-free.
We recommend doing the following regularly:
• Clean the external lens surfaces
• Check the screw connections and plug-in connections
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
Cause /
Cause
Depolarizing property of the
object surface (e.g., tape), re‐
flection /
Depolarizing property of the
object surface (e.g., tape), re‐
flection
Measures /
Measures
for the application in question
(we recommend only using
SICK reflectors) / Check sen‐
sing range and adjust if ne‐
cessary; see graphic H. / Dis‐
tance between the sensor and
the reflector is too long
Reduce sensitivity or change
the position of the sensor /
Reduce sensitivity or change
the position of the sensor
8010585.YM42 | SICK
Subject to change without notice