Programming The Hot Water Measures; Cleaning And Maintenance - Faema E98/A-1 Compact Manual De Instrucciones

Tabla de contenido
English

Programming the hot water measures

Position a suitable container for the amount to be programmed under
the hot water pipe (5).
Press (and keep momentarily pressed) the hot water dispensing push
button (19). The indicator light of the pressed push button will remain
on (not flashing).
When the amount of water in the container reaches the required level,
release the push button (19).
Cappuccino-Maker instructions
Plunge the suction pipe (31) into the milk container.
Place a cup or other suitable receptacle under the cappuccino system
(2).
Turn the temperature setting screw completely clockwise (33), and then
!
turn it back half a turn.
Turn the temperature setting screw (34) completely clockwise. Then
turn it back half a turn.
You can now dispense milk or cappuccino by pressing the required
push button.
Cappuccino froth setting
If there is too much froth:
turn the air setting screw (33) slightly clockwise.
If there is too little froth:
turn the air setting screw (33) slightly counter clockwise.
Cappuccino temperature
If the cappuccino is too hot:
turn the temperature setting screw (34) slightly counter clockwise.
If the cappuccino is not hot enough:
turn the temperature setting screw (34) slightly clockwise.
Hot milk dispensing without froth
Press the knob (32) fully in.

Cleaning and maintenance

Cleaning the Cappuccino System
The cappuccino system should be cleaned at the end of the working
day.
1.
Put
/
litre of cold water into a suitable receptacle with a dose
1
2
of liquid detergent (see product instructions).
2.
Remove the suction pipe (31) from the milk container and dip it
into the solution.
3.
Press the push button (9), and repeat the operation until the
detergent is all used up.
4.
Dismount the cappuccino system (2):
unscrew the knob (35) and remove the cappuccino system (2);
remove the cover (36);
unscrew and remove the knob fixing ring (32);
unscrew and remove the setting screw (33);
prepare another dose of detergent and wash the parts sepa-
rately, removing any residues with a sponge;
remount the cappuccino system.
5.
Rinse by drawing up at least 1 litre of cold water.
19
5
1 gr.
2
31
34
2
35
31
34
English
19
5
2 gr.
33
32
33
32
Tabla de contenido
loading

Este manual también es adecuado para:

E98/a-2 compact

Tabla de contenido