Storage; Receiving, Unpacking, First Cleaning - Qualified Operator; Installation And Environmental Conditions - Specialized Technician - Arneg Belgrado FISH SELF Manual Del Usuario

Belgrado FISH
English

8. Storage

DO NOT store the cabinets in uncovered areas and therefore subjected to
atmospheric agents and to direct sunlight. Exposure to ultraviolet rays causes
permanent deformation of the plastic materials and damages cabinet components.
The cabinets must be stored in indoor environments that are dry and humidity-free
and that have a temperature ranging between -25°C and + 55°C and a humidity
between 30% and 90%.
Before storing the cabinets, check that the packing is intact and that it does not
display defect that may compromise preservation of the cabinets.

9. Receiving, unpacking, first cleaning - qualified operator -

Before any unpacking operation, adopt all the precautions possible to avoid injuries to
the operator.
The cabinet can be supplied packed as described below:
With frame in wood fixed to the base and nylon casing blocked by straps (standard)
(Rif. 5).
With a cardboard casing (on request) (Rif. 6).
With cage in wood (on request) (Rif. 7).
When receiving the cabinet:
Make sure the packing is intact and that it does not display readily apparent
damages;
Carefully perform the unpacking operation in order not to damage the cabinet;
Check the integrity of the cabinet components;
If any damage is found, immediately contact your supplier;
Slowly remove the protective films without tearing them, to avoid glue residues; the
residues can however be removed with appropriate solvents.
Proceed with a first cleaning using neutral products and dry with a soft cloth; do not
use abrasive substances or metallic sponges;
To correctly dispose of the packing, bear in mind that it is made up of: Wood -
Polystyrene - Polythene - PVC - Cardboard.
DO NOT use alcohol to clean the parts in methacrylate (Plexiglas).
During the unpacking operations, do not leave elements of the packing
unattended such as nails, wood, gripper rods, nylon, etc. and tools used for
the operation such as pliers, scissors, pincers, in the work area, which could
cause wounds and injuries.
These objects must be removed with appropriate means and brought to their
respective collection places.

10.Installation and environmental conditions - specialized technician -

Any modification to the installation described herein must be authorized by
ARNEG Spa
To ensure that the technicians appointed to installation may operate safely, use the
instruments and protection clothing required by the safety norms or by the laws in force
in the country of installation. At any rate, always use adequate equipment and clothing,
such as: anti-injury boots, protection gloves, spirit level.
The cabinet has been designed to exclusively operate in indoor environments.
For the installation, adhere to the following:
carefully examine the installation area, eliminating any danger to the operator;
Do not position the cabinet:
in environments where explosive gaseous substances are present;
in open air and therefore subjected to atmospheric agents;
near heat sources (direct sunlight, heating systems, incandescence lamps, etc.)
near air currents (near doors, windows, air-conditioning systems, etc.) that exceed
a speed of 0.2 m/sec.
1 - remove the wooden supports at the base (used for transport)
22 05060146 00 15/05/2013