Urrea BAL24 Manual De Usuario página 24

mm, you can press 'C' torealize the conversion
between the units.
• Check the Dia value, which means the diam-
eter of the rim, marked on the tire. Press 'Dia
-/+' to adjust the displayed in the right side
display window until the displayed value to be
the rim diameter value. You can also use 'C' to
realize the conversion of the Br unit to mm.
4. Lower down the protective cover (you can
also press the start key). After the machine
start, rotate and test, it will automatic stops. In
the left /right window ,the corresponding val-
ues will be displayed. Rotate the tire, when all
the position indication lamps light. Pls add the
weight corresponding to the value displayed in
the window in the 12 hrs position inside/out-
side. Once again, start the machine to test. The
window will display thye unbalance value. The
balance process will be completed until reach-
ing the balance range you requied.
MACHINE PARAMETER SETUP
INNER
Press to enter program setup menu.
-p- (Hood setup) press
trance.
INTERNA
INTERNA
Select to setup the on/off of the function of
the hood. Press to confirm.
-SP- (Hood control function setup), in the up-
per condition, press 'Dis -/+'. The display will
display as the left figure.
to confirm the entrance. Select 'Dis
Press
-/+' to setup the on/off of the hood function
and press key to confirm.
24
OUTER
to confirm the en-
EXTERNA
EXTERNA
INTERNA
INTERNA
INTERNA
APP (minimum unbalance value setup).
Press to enter the unit of 1Gr& 5Gr. Con-
firm the entrance, press
-/+' to adjust the corresponding unit and press
key to confirm.
INTERNA
INTERNA
BIP: (Beeper setup). Press
off of the deeper.
Press to enter the sub-level program set-
up.
INTERNA
INTERNA
"UP"—"Ent" Press
function setup.
2 Option: "IN"– "TES"& "CAL" –"CAL".
INTERNA
INTERNA
EXTERNA
EXTERNA
EXTERNA
and of 'Dis
EXTERNA
EXTERNA
to setup the on/
EXTERNA
EXTERNA
key to enter the special
EXTERNA
EXTERNA