Temperature, Humidity & Pressure Trend Indicators; Maximum And Minimum Temperature And Humidity; How To Use Channel-1 Temperature/Humidity Alarm - Oregon Scientific BAR122HGN Manual Del Usuario

TEMPERATURE, HUMIDITY & PRESSURE
TREND INDICATORS
The temperature-trend, humidity-trend and pressure
trend indicators show the trends of collected readings.
Arrows indicate a rising, steady or falling trend.
Arrow indicator
Temperature
Rising
Trend
Arrow indicator
Rising
Humidity Trend
Arrow indicator
Pressure Trend Rising
NOTE If the readings goes above or below the
measuring range of the main unit or the remote unit (
stated in specification), the display will show "HHH"
or "LLL".
P/N:086L002706-173 REV1
Steady Falling
Steady Falling
Steady Falling
MAXIMUM AND MINIMUM TEMPERATURE
AND HUMIDITY
The maximum and minimum recorded temperature
and humidity readings will automatically be stored in
the memory.
To display the maximum and minimum display
memory:
1. Select the channel to be checked.
2. Press [memory] once to display the maximum
temperature and humidity and again the minimum
temperature and humidity. The respective indicators,
MAX or MIN will be displayed.
To clear the memory:
• Press and hold [MEMORY] for 2-seconds.
If you press [MEMORY] now, the maximum and minimum
recordings will have the same values as the current ones
until different readings are recorded.
HOW TO USE CHANNEL-1 TEMPERATURE/
HUMIDITY ALARM
Upper and lower temperature and humidity limits for
channel-1 can be set so that an alarm activates when
the limits are exceeded.
The high and low temperature and humidity displays are
selected by sequentially pressing HI/LO.
9