Cleaning Modes; Edge Cleaning - Qilive Q.5147 Manual Del Usuario

10. Do not use the robot vacuum cleaner in wet or moist environment (e.g. bathroom),
on wet surfaces or surfaces with standing water. Do not use the robot to vacuum up
any liquids, wet dirt or wet areas, as this could damage the device.
4.8

CLEANING MODES

Depending on different requirements and floor types, the robot vacuum cleaner has
different cleaning modes to choose from.
4.8.1 AUTO CLEANING MODE
This is the standard cleaning mode and most commonly
used for daily cleaning. In auto cleaning mode, the
robot vacuum cleaner will systematically clean the room
following the forward and backward pattern.
Setting method: After the robot vacuum cleaner is
powered on, press one time the ON/OFF power button
on the top of the device or press the "Auto cleaning"
button on the remote control to start cleaning.
Note: The suction power can be adjusted, depending on the type of floor, to provide a
deeper cleaning of the surfaces. There are 3 suction modes: 1. Quite (energy-saving), 2.
Standard, 3. Turbo. To increase or decrease the suction power, press the auto cleaning
button on the remote control to the desired mode or choose the mode from cleaning
strength on the app.
4.8.2 SINGLE ROOM
This cleaning mode is used to clean a single room.
Setting method: After the robot vacuum cleaner is powered on, press
the button until the single room icon
display on the remote control.
Notes:
• When scheduled the robot to clean a single room, ensure the door of that room is
closed.
• If the charging station is not located in cleaning room, after finishing the cleaning
program, the robot will return to the starting point.
4.8.3

EDGE CLEANING

This cleaning mode is suitable for cleaning edges, corners or along the
perimeter of fixed objects (e.g. furniture).
Setting method: After the robot vacuum cleaner is powered on, press
the button until the edge cleaning icon
the display on the remote control.
appears at the bottom of the
appears at the bottom of
19 19
EN