Qilive Q.5147 Manual Del Usuario página 24

5.2.7 CLEANING THE FRONT CASTER WHEEL
EN
1. Remove the front caster wheel by inserting a flat
head screwdriver at the base of the wheel and pry
it up.
2. Remove any debris, hair, strings, threads and all the
dirt accumulated inside the wheel cavity and from
the wheel.
3. Spin the wheel by hand. If rotation is restricted, check
and clear any debris or hair wrapped around it.
4. Reinstall the front caster wheel. Ensure the wheel clicks back into place.
5.2.8 CLEANING THE DRIVING WHEELS
• If the robotic vacuum cleaner suddenly starts to zigzag, there may be foreign
substances stuck on the driving wheels. Wheels clogged with hair, strings, threads
and debris may result damage on the floor and improper functioning of the robot.
• Check for foreign substances and remove them using a cleaning brush's knife or a
pair of blunt nippers (not included) if necessary. Wipe the wheels with a soft, dry and
clean cloth.
5.3 USING THE BOUNDARY STRIP
The magnetic
delimitation of the cleaning space, restricting the
robot's access to certain areas and rooms. It can
also be used to prevent the robot vacuum cleaner
from touching certain objects or reaching under
pieces of furniture. The unit will recognize and will
not cross the boundary strip's line. The boundary
strip can be placed anywhere inside the house.
To install, place the boundary strip on the floor. Ensure it is perfectly flat. If necessary,
use adhesive tape to prevent it from rolling.
If needed, the length of the boundary strip can be adjusted. Measure the length correctly
and cut.
Notes:
• When fixing the boundary strips, pay attention not to damage the floor, wall, etc.
• It is not recommended to use the boundary strips on carpets.
• Keep away from heat sources, open flames, and hot surfaces.
5.4 GENERAL CLEANING INFORMATION
1. Never immerse the robot vacuum
cleaner or any accessories in water or
other liquids!
2. Do not wash or immerse the dust bin
in water or other liquids!
3. Do not spray or pour water or any
other liquid on or inside the robot
vacuum cleaner.
4. Do not use any abrasive cleaners, chemicals, glass cleaners, universal cleaners or
oil-based maintenance agents!
5. Do not lift the robot vacuum cleaner by holding the dust bin release button or the
area around the dust bin as it may be easily detach, causing damage to the unit.
boundary strip allows the
24