Qilive Q.5147 Manual Del Usuario página 17

4.6.3 BATTERY AND CHARGING THE ROBOT
The battery status is shown on the display. When the battery level drops the robot
automatically returns to the charging station for a recharge. The robot vacuum cleaner
can be sent to the charging station by selecting the recharge mode function. When is
connected to the charging station, the robot has the status "Charging".
4.6.4 MANUAL CONTROL
You can use the direction arrows to manually coordinate and redirect the robot vacuum
cleaner to a specific area of the room or move the robot in the desired direction, forward-
backward or right-left.
4.6.5 SETTING SUCTION POWER
The suction power "Cleaning Strength" can be adjusted from the application. Choosing
between "Energy-saving", "Standard" and "Turbo". The cleaning strength (suction power)
to all the above-mentioned modes can be only adjusted via the app.
4.6.6 CLEANING SCHEDULE
The "Schedule cleaning" option allows you to enter the robot scheduling menu. By
selecting "Add" in "Schedule Cleaning" bookmark, you can set the time and the days in
which the robot will start and perform the cleaning program. The available cleaning mode
in scheduling the cleaning is auto cleaning only.
4.6.7 DEVICE LOCATION FUNCTION
In case the robot got stuck or you do not know where it stopped when it has finished the
cleaning program, the app will help you find it. Select the "Positioning of robot" option
and there will be a "Ding-Dong" sound prompt, unless the "Mute" function in "More"
options is activated.
4.6.8 ROOM MAP
Selecting the option "Show map" from the application, will display the map of the surface
scanned by the robot during the cleaning program. This map is generated at each scan
and allows you to view the cleaning process: travelled route, cleaning path, position of
the robot vacuum cleaner, cleaning time and area. Depending on the wireless network,
the real time map may be displayed with delay or, in some cases, it is not available. The app also keeps a history record of cleaning cycles, "Cleaning Record" where is list
of cleaning time and area and if you select one, it will display the map of the surface
scanned by the robot during the cleaning program.
4.6.9 MUTE MODE
By selecting the "More" option, the "Mute" function can be activated. Keep in mind that
when the robot vacuum cleaner is in silent mode, it will not emit any audible signal
sounds.
4.6.10 SETTINGS
By tapping on the symbol in the upper right corner, you enter in the robot settings menu.
Here you can view information about the device, you can set the name according to
your preference, ex.: free dynamic, or you can choose the location where the device is
located.
4.6.11 SHARE DEVICE
The robot allows only one main connection with a single account, through the application.
If you want to share the device with other family members, which already have user
accounts registered in the QILIVE SMART app, choose "Share devices", then "Add
Sharing" and enter the correct mobile phone number or email address to add additional
users.
Notes: Those with whom you want to share the device must already have user accounts
registered in the QILIVE SMART application.
17 17
EN