Steinberg Systems SBS-ZW 3001H Manual Del Usuario página 4

USER MANUAL
ELECTRONIC COUNTING SCALE
EN
SPECIFICATION
• Rechargeable accumulator inside, you can use the scale during recharging.
• Auto zero-setting when switch on the scale.
• Auto zero-tracing.
• 1~100 times of accumulating.
• Power supply: AC 220V (±10%) / 50 Hz, 110V/60HZ, DC 6V / 4Ah (Rechargeable
accumulator inside).
• Working temperature range: 0° ~ +40°
• Relative humidity: ≤ 85 % RH
OPERATION
The scale must to be placed on the stable and flat surface, adjust its four screw carrier
pole to horizontal, switch on the power, scale begin self-testing until getting normal
weighing condition, now all the windows display zero. The function of the keys as follow:
1. Switch on the power, scale begin self-testing until getting normal weighing condition.
2. [Zero] key: Set the weight window to zero, and the zero signal displays.(Range≤4%FS)
3. [Tare] key: Set or clear the tare (Range≤1/3F.S)
• Put on the object, then press the key, the weight window displays zero, the
taresignal displays. You can't use the scale in the state of zero signal displaying in
longterm, otherwise the function of auto zero-tracing will disappear, and the zero
point will excurse.
• Take away the weighing object, scale indicate negative, press this key again to clear
tare.
4. [0~9] number key: For input the data from right to left in turn in Unit Weight
window, input number will auto clear while next key inputting after 3 seconds
5. [Clear] key: Under weighing condition, press this key to clear the unit weight.
6. [Accu] key: Place the weight on the plate and enter the unit weight using the
number buttons. Displays will show the corresponding converted values. Press
ACCU key. WEIGHT window will show –Add– and UNIT WEIGHT window will
show "1". Remove the weight from the plate, press any of number buttons 0-9 and
place another weight on the plate (at this point you can change the unit weight
value by using number buttons), press ACCU –UNIT WEIGHT window will show
"2" (i.e. another, second measurement) and NUMBER window will show sum of
first weighing and second weighing. You can make 99 additions as described above.
7. [A.C.] key: Clear the memorized accumulating data, exit the accumulating stateand
the accumulate mark will disappear.
Rev. 01.07.2020
7
EN