Idiomas disponibles
Idiomas disponibles
53. Route the rear harness (2) and install the clip (1) into
the open hole in the body.
54. Bundle the excess wire with the connector (3) and se
cure with a tie strap (4). This is important to prevent
any noise or chafing.
55. Install the driver side inner fender (2).
56. Install the push pins (1) go secure the inner fender to
the body.
57. Lower the vehicle.
58. Position the quarter trim tabs (3) into the appropriate
slots in the body and seat the trim (2) fully.
59. Install the cargo hook and retainer if necessary.
Oct 26, 2011
13
K6861339
