Installation And Operation In The Usa And Canada; Product Description; Configuration - SICK LFC Manual De Instrucciones

are explicitly forbidden. For safety reasons, only
the accessory specified by the manufacturer
must be used.
To avoid any danger, the safety approval mar-
kings and safety tips on the device must also be
observed.
2.5 Installation and operation in
the USA and Canada
This information is only valid for USA and Cana-
da. Hence the following text is only available in
the English language.
Installations in the US shall comply with the
relevant requirements of the National Electrical
Code (ANSI/NFPA 70).
Installations in Canada shall comply with the
relevant requirements of the Canadian Electrical
Code
A Class 2 power supply unit has to be used for
the installation in the USA and Canada.
3

Product description

3.1

Configuration

Scope of delivery
The scope of delivery encompasses:
•
LFC point level switch
•
Information sheet " Documents and soft-
ware" with:
– Instrument serial number
– QR code with link for direct scanning
Note:
Optional instrument features are also
described in this operating instructions
manual. The respective scope of delivery
results from the order specification.
Scope of this operating instructions
This operating instructions manual applies to
the following instrument versions:
•
Hardware version from 1.0.0
•
Software version from 1.0.0
Constituent parts
The LFC consists of the components:
•
Housing with integrated electronics
•
Process fitting
•
Plug
LFC • Transistor (PNP)
Abb. 11: LFC
1 Plug connection
2 360° status indication
3 Instrument housing
4 Process fitting
5 Sensor
Type label
You will find the type plate on the sensor
housing.
The type label contains the most important data
for identification and use of the instrument.
1
2
LFC-XXSGTM
3
12...35V
4
PNP 250mA
5
IP66/67/69, TYPE 6P
MWP 25bar (2500kPa)
6
PEEK, FKM, 316L
7
2021
www.sick.com
D-79183 Waldkirch,
Made in Germany
Abb. 12: Layout of the type label (example)
1 Material number
2 Product name
3 Serial number
4 Voltage supply and signal output
5 Protection rating
6 Permissible process pressure
7 Material wetted parts
8 QR code for device documentation
9 Fabrication year
10 Approvals
Documents and software
Further information can be found on our home-
page.
There you will find the documentation and
further information about the device.
3 Product description
1
2
3
4
5
6073811
s/n 1234567
10
1W
9
8
19