DENTAURUM Paraline Modo De Empleo página 3

➆
➃
➅
Instructions
Place the Paraline on a level working area. Mount the master model on the model table already available
or supplied with the unit. Loosen the knurled screw ➁ and raise the sliding rods to the necessary level.
Fasten with retainer ring ➀ . Grip the instrument e. g. analyzing rod in the surveying hand-piece ➃ . Place the
model table ➄ in the most convenient position on the work surface ➅ . Loosen locking screw ➂ , so that the
arms may be moved freely. By moving the surveying handpiece ➃ vertically and horizontally, survey the
model.
Locking the surveying arm (e. g. Attachments)
Rotate the surveying handpiece ➃ forwards to the centre of the work surface and lock into
position with screws ➀ , ➁ , and ➂ . Set the surveying arm to the required level and fasten using screw ➆ .
When ordering spare parts, please quote the unit number (type plate on rear side of unit).
➂
➁
➀
➄
Paraline
Surveyor
Application
for partials
Original Kit
1 Paraline unit with surveying arm
1 Analyzing rod
1 Graphite holder
10 Replacement
graphite markers
4 Undercut gauges
0.25/0.35/0.5/0.75 mm
Recommended accessories
Model table ➄
Not included in Original Kit.
REF for those accessories
which are included in the Original Kit.
1 Analyzing rod
1 Graphite holder
10 Replacement graphite
markers red
1 Undercut gauge
0.25 mm
0.35 mm
0.5 mm
0.75 mm
EN
REF 094-290-00
A
B
C
D
REF 086-340-00
REF 094-287-00 A
REF 094-288-00
B
REF 094-289-00
C
REF 094-283-00
REF 094-284-00
REF 094-285-00
REF 094-286-00
paraline  en
3