Unpacking The Washer; Important - Haier QFW150 Serie Manual Del Propietário

UNPACKING THE WASHER

Recycle or destroy the carton and
WARNING
plastic bags after the washer is
unpacked. Make materials inaccessible to children.
Children might use them for play. Cartons covered with
rugs, bedspreads or plastic sheets can become airtight
chambers causing suffocation.
1. Cut and remove all packaging straps.
2. While it is in the carton, carefully lay the washer on its
side. DO NOT lay the washer on its front or back.
3. Turn down the bottom flaps. Remove all base packaging
including the styrofoam base.
4. Carefully return the washer to an upright position and
remove the carton by lifting it upward.
5. Carefully move the washer to within 4 feet (122 cm) of
the final location.
6. Remove the following from the back side of the washer:
4 bolts
4 plastic spacers (including rubber grommets)
NOTE: Do NOT remove the screw or clip holding the hose.
18
INSTALLATION INSTRUCTIONS
7. Insert shipping bolt hole covers into shipping bolt holes.
NOTES:
• Failure to remove the shipping braces can cause the
washer to become severely unbalanced.
• IMPORTANT: Save all bolts for future use.
If you must transport the washer at a later date, you
must reinstall the shipping support hardware to prevent
shipping damage. Keep the hardware in the plastic bag
provided.
49-3000191 Rev. 1