Kohler K-702210 Guia De Instalacion página 14

Cover
Strip
11. Install the Cover Strips and Water Diverter
Rotate the previously cut cover strips into place from the inside of the shower. The cover strips are
secured with magnets.
Place the water diverter on the inside of the bottom frame of the shower door.
Drill three 1/8" (3 mm) holes through the bottom frame using the pre-drilled holes in the water
diverter as a template.
NOTE: Drill only to the center of the extrusion [through two layers, approximately 5/16" (8 mm) deep].
Secure the water diverter using three #6 x 3/8" panhead screws.
1015287-2-B
Cover
Strip
Bottom
Frame
5/16" Drill Depth
14
Rotate cover
strip into place.
Water
Diverter
#6 x 3/8"
Panhead Screw
Kohler Co.