General Information; Design And Function - WIKA TR10-0 Manual De Instrucciones

1. General information / 2. Design and function

1. General information

The instrument described in the operating instructions has been manufactured
■
EN
using state-of-the-art technology. All components are subject to stringent quality and
environmental criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument.
■
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations
■
for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
■
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:

2. Design and function

2.1 Description
The model TR10-0 (resistance thermometer) or TC10-0 (thermocouple) electrical
thermometers are comprised of a measuring insert which is built into a certified case. In
combination with a flame path fitting that is screwed into the head, the measuring insert
functions as a flameproof joint. The measuring insert (TR10-1, TC10-1) is replaceable.
Sensor design in model TR10-0
The measuring resistor is embedded in ceramic powder, heat-resistant potting compound,
cement compound or thermally conductive paste. A welded cap forms the external shell of
the sensor tip of the measuring insert.
4
www.wika.de / www.wika.com
TE 61.01 (TR10-0), TE 66.01 (TC10-0)
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
[email protected]
WIKA operating instructions models TR10-0, TC10-0 (FM, CSA)