Introduction Of Advanced Tuner Operation; Storing Broadcast Frequencies - Pioneer EH-P88RSII Manual De Instrucciones

Tuner
Introduction of advanced
tuner operation
1 1 1
1 Function display
Shows the function status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL to switch between the
functions in the following order.
BSM (best stations memory)—Regional (re-
gional)—Local (local seek tuning)—
PTY Search (program type selection)—
Traffic ANNOUNCE (traffic announcement
standby)—Alternative FREQ (alternative fre-
quencies search)—News Interrupt (news
program interruption)
# You can also switch between the functions in
reverse order by turning MULTI-CONTROL coun-
terclockwise.
# To return to the frequency display, press
BAND.
# If MW/LW band is selected, you can only se-
lect BSM or Local.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.

Storing broadcast frequencies

You can easily store up to six broadcast fre-
quencies for later recall.
1 When you find a station that you want
to store in memory, turn MULTI-CONTROL
to switch to the preset channel list mode.
2 Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
The number you have selected will flash in the
preset number list and then remain lit. The se-
lected radio station frequency has been stored
in memory.
# If you do not operate the list within about 30
seconds, the preset channel list mode is can-
celed automatically.
Notes
! Program service name is not displayed unless
the radio receives the frequency.
! Up to 18 FM stations, six for each of the three
FM bands, and six MW/LW stations can be
stored in memory.
! You can also store a broadcast frequency in
memory pressing 1 to 6 on the remote con-
trol.
Section
04
17
En