Port Pair Alignment Checking Procedure; Rack Reference - Renishaw ACR2 Guia De Instalacion

2.3 Port pair alignment checking procedure

Figure 4 – Placing the alignment tool onto the ACR2 port

2.4 Rack reference

Manual No. H-1000-4045
In order to check the alignment of a port pair, the following procedure should
be used:

Place the tool onto the alignment pins, as shown in Figure 4, ensuring
the alignment pins are seated in the levelling tool vee grooves.

If the port is correctly aligned, the bubble should be central within the
graticule.
If the alignment is found to be incorrect, procedure 2.2 (port pair alignment)
should be repeated.
It may be useful to add a reference sphere to the rack pillar. The reference
sphere can be used as a master reference for the position of the rack pillar
relative to the zero reference position of the machine.
Alignment tool
NOTE
INSTALLATION
Bubble
level
23