Tabla de contenido
INSTALLATION
2
INSTALLATION
2.1 Port pair mounting
20
The ACR2 autochange system is a modular system with pairs of ports
supplied by Renishaw to be mounted on a suitable fixture. In this way, any
number of racks of two, four, six or more ports can be created and positioned
anywhere on the CMM.
Renishaw do not supply the mounting pillar.
Each port pair can be mounted using four off M8 bolts supplied with the kit
or, if a proprietary extrusion is used, M8 T-slot nuts. Mounting hole positions
for M8 bolt mounting are shown in Figure 2.
NOTE
Manual No. H-1000-4045
Tabla de contenido
