Tabla de contenido
CONTENTS
2
The copyright in this document is vested in Renishaw plc. The document must not be
reproduced in whole or in part, or used in tendering or manufacturing purposes, except with
consent of Renishaw plc and then only on the conditions that this notice is included in any such
reproduction.
Information contained within this document is believed to be accurate at the time of publication
but no liability whatsoever can be accepted by Renishaw plc arising out of any use made of this
information.
Unless otherwise expressly stated neither this document nor any information contained in shall
be deemed to constitute or form any part of an invitation to treat or offer contract for the
product(s) described in this document.
Renishaw reserves the right to change specifications or any information contained in this
document without notice.
© 1999 Renishaw plc. All rights reserved.
Renishaw® is a registered trademark of Renishaw plc.
Manual No: H-1000-4045-01-B
First issued –
August 1999
Revised
–
February 2000
CONDITIONS
Care of probing system
Renishaw probing systems are precision tools used to obtain precise measurements and should
therefore be treated with care.
Changes to equipment
Renishaw reserves the right to change specifications without notice.
Renishaw reserves the right to improve, change or modify its hardware or software without
incurring any obligations to make changes to Renishaw equipment previously supplied.
Warranty
Renishaw plc warrants its equipment provided that it is installed exactly as defined in associated
Renishaw documentation.
Consent must be obtained from Renishaw if non-Renishaw equipment (eg interfaces and/or
cabling) is to be used or substituted. Failure to comply with this will invalidate the Renishaw
warranty.
Claims made under warranty must be made from authorised service centres only, which may be
advised by the supplier or distributor.
Patents
Features of the various products shown in this Installation Guide and features of similar products
are the subject of the following patents and patent applications:
EP 0142373
JP 2098080
EP 0816014
JP 12,662/1998
EP 0293036
US 4651405
EP 0836377
Manual No. H-1000-4045
Tabla de contenido
