Technical Data; Charging The Battery - Berner BACBR 14.4 V Instrucciones Originales De Uso

Have damaged parts repaired before using the
tool. Many accidents are caused by poorly serviced
riveters.
Use riveter, accessories, attachments, etc. only
as described in these instructions. Give consid-
eration to the working conditions and the work to
be carried out. The use of riveters for other than
the intended applications can lead to dangerous
situations.
OPERATION AND HANDLING OF
THE BATTERY
Charge the batteries (F) only in chargers
recommended by the manufacturer.
There is a risk of fire if a charger
designed for a given type of battery is
used with other batteries.
Use only the specified batteries in the riveters. The
use of other batteries can lead to injuries and the
risk of fire.
Keep battery (F) not in use away from paper clips,
coins, keys, nails, screws or other small metal
objects that could cause bridging of the contacts. A
short circuit between the battery contact can cause
burns or a fire.
If improperly used or damaged, liquid can escape
from the battery (F).
Avoid contact with this liquid. In the event of acci-
dental contact, wash off with water. If the liquid gets
into the eyes, obtain additional medical assistance.
Escaping battery liquid can cause skin irritation or
burns.
SERVICE
Have your riveter repaired only by
qualified specialist personnel and only
with original spare parts. This will ensure
that the safety of the riveter is main-
tained.

TECHNICAL DATA

Blind rivet working range
[Ø mm]
COMMISSIONING

CHARGING THE BATTERY

Note: The battery (F) is partially charged on
delivery. In order to ensure the full performance of
the battery (F), charge the battery (F) completely in
the charger before the first use. Observe the notes
on the state of charge on the charger. The Li-Ion
battery (F) can be recharged at any time without
shortening its service life. Interruption of the charg-
ing cycle does not damage the battery (F). The
BACBR 14.4 V
charger is equipped with a temperature monitoring
device that permits charging only in the tempera-
2.4 - 5.0
ture range between 0 °C and 40 °C.
Max. mandrel diameter
[mm]
Riveter weight incl. battery
[kg]
Total stroke [mm]
Drive
Tensile force [N]
Sound emissions LpA / K //
LWA / K [dB]
Vibrations ah / K [m/s²]
Service interval [number of
rivets]
Battery [V]
Battery [Ah]
Battery cells [number]
Battery weight [kg]
Battery working temperature
[°C]
Charger input voltage
[V AC / Hz]
Charger output voltage
[V DC]
Charger output current [Ah]
Charger working tempera-
ture [°C]
Charger charging time to
90 % / 100 % [min]
Charger weight without
cable [kg]
3.4
1.8
21
DC
10,000
<75 / 3 // <80 / 3
< 2.5 / 1.5
100,000
14.4
2.0
4
0.32
-5 to 45
100 to 240 / 50
to 60
7.0 to 21.0
4
0 to 40
22 / 30
0.55
English | 13