Introduction; System Installation - Airzone RADIANT365 Manual De Instrucciones

INTRODUCTION

Airzone systems enable the management of Master and Zone interfaces. Master thermostats enable mode management or
define the efficiency level with the Eco-Adapt function.
ES
It is recommended the use of a Blueface thermostat as Master Interface, this enables time schedule management and more
unique functionalities.
EN
Remember: This system only admits one Master thermostat.
To distinguish a Master Interface from a Zone Interface, check the next points.
FR
- Blueface Master: Mode and Eco-Adapt icons shown in white color.
- Blueface Zone: Mode and Eco-Adapt icons shown in gray color.
IT
- Think Master: Accessing the settings menu, Operation Mode is available.
PT
- Think Zone: Accessing the settings menu, Operation Mode is unavailable.
DE

SYSTEM INSTALLATION

Before the Airzone system commissioning, please check:
The system is going to control works correctly without the Airzone system installed.
Important: For installations with radiant surfaces only, it is recommended the installation of buffer tanks.
In order to install the Airzone system, carefully follow these steps:
Connect all the necessary elements (see sections Assembly and Connection)
- Connect all the elements of the system (thermostats, modules, etc.).
- Power the main board.
Check all the assembly and the connection are correct (see section Assembly and connection evaluation)
Configure the system
- Configure all the thermostats (see sections Initial configuration and Advanced settings).
If you have any other doubt, check the user and installation manuals
Access all our technical documents and the self-diagnosis section, check the most FAQs,
20
certificates, watch our videos and read our declaration of conformity at:
myzone.airzone.es/productos/