English
Dr. Jürgen Hoffmann
Director Product Certification & Regulatory
Affairs
16 UKCA Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
Designation:
Make:
Series:
Serial identification number: 4818
conforms to the relevant provisions of UK regula‐
tions The Restriction of the Use of Certain Haz‐
ardous Substances in Electrical and Electronic
Equipment Regulations 2012, Supply of Machi‐
nery (Safety) Regulations 2008, Electromagnetic
Compatibility Regulations 2016 and Noise Emis‐
sion in the Environment by Equipment for use
Outdoors Regulations 2001 and has been manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion:
EN 55014‑1, EN 55014‑2, EN 60745‑1,
EN 60745‑2‑15, EN 61000‑3‑2, EN 61000‑3‑3
The measured and the guaranteed sound power
level have been determined in accordance with
UK regulation Noise Emission in the Environ‐
ment by Equipment for use Outdoors Regula‐
tions 2001, Anhang 8, using the ISO 11094
standard.
Measured sound power level
HSE 42:
HSE 52:
Guaranteed sound power level
HSE 42:
HSE 52:
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
28
Electric hedge trim‐
mer
STIHL
HSE 42
HSE 52
95 dB(A)
95 dB(A)
97 dB(A)
97 dB(A)
16 UKCA Declaration of Conformity
The year of construction, the country of manufac‐
ture and the machine number are shown on the
machine.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann
Director Product Certification & Regulatory
Affairs
17 General Power Tool Safety
Warnings
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the EN 60745
European standard for hand-held motor-oper‐
ated electric tools. STIHL is required by law to
print these standardized texts verbatim.
The safety precautions and warnings on avoiding
an electric shock given under "2) Electric Pre‐
cautions" do not apply to STIHL cordless electric
power tools
WARNING
Read all safety warnings and instructions. Failure
to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref‐
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat‐
tery-operated (cordless) power tool.
17.1
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
0458-762-9821-C