Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
1
Turning off water supplies
Shut off the main water supply before installation.
Turn the hot and cold water supplies off before
removing your current faucet.
Open the faucet handle to relieve water pressure
and ensure the water supply has been completely
shut off.
3
Installing your valve
Position the valve body (J) so that
the plaster guard (H) is flush with
the interior finished wall.
The side part of the plaster guard
(H) can be broken away to fit a
smaller hole in the wall.
2
4-13/16 in.
(122 mm)
2 in. - 3 in.
(50.8 mm- 76.4 mm)
2-1/2 in.
(63 mm)
H
Finished Wall
7
Please contact 1-855-HD-GLACIER for further assistance.
Measuring for ideal tub/shower
performance
Note the recommended installation distance of the
shower arm (B), the valve body (J), and the spout
(F) from the floor of the tub basin.
Recommended installation of the shower arm is
with a flanged elbow fitting (not included)
attached to a wood brace.
CAUTION: Installation of this product at non-recommended
measurements may lead to issues such as water discharge
from the showerhead during tub fill mode.
49 in.
(1245 mm)
6 in.
(152 mm)
J
J
5-3/8 in.
(136 mm)
5-1/8 in.
(130.3 mm)
3-1/16 in.
(77.5 mm)
HOMEDEPOT.COM
Tabla de contenido
