Care And Cleaning - Glacier bay F1AA0005BNV Guía De Uso Y Cuidado

Ocultar thumbs Ver también para F1AA0005BNV:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Care and Cleaning

This faucet is designed for years of trouble-free performance. Keep it looking new by doing the following:
Clean periodically with a soft cloth.
Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty.
Troubleshooting
Problem
Hot and cold are reversed.
There is no or a low water
flow.
There is leaking or dripping
from the spout.
There is only hot water or only
cold water from the spouts.
Water comes out of the show-
erhead during tub fill mode.
The temperature range is
restricted.
Unable to install the handle or
the handle rubs against the
escutcheon.
The handle is hard to turn.
Possible Cause
Lines reversed or cartridge
installed upside down.
One or both water supplies are
not turned on.
Grommets not sealing properly.
Balancing spool stuck.
The pipe is incorrect.
The distance between the valve
and the showerhead is less than
46 in.
There are too many elbows or
something else that is restrict-
ing the flow of water exiting the
valve.
There is a restriction between
the valve and the tub spout.
The valve is installed upside
down.
The handle (more common in
knob models) is installed upside
down.
Temperature limit stop is out of
position.
The valve is installed too far
back from the finished wall.
The cartridge stem is difficult
to rotate.
12
Solution
Rotate the cartridge stem 180°
so that the notch is facing down
towards the drain.
Turn both water supply valves
counterclockwise to the on
position.
Replace the cartridge.
Replace the cartridge.
Change the pipe to IPS or copper.
The distance from the shower-
head and valve moved to at least
46 in.
Change or remove anything
restrictive.
Remove the tub spout and flush
out debris and/or replace the
undersized line or fittings.
Remove the valve and reinstall it
using the correct orientation.
Remove the handle, rotate it
180°, and re-install.
Reposition the temperature limit
stop to the desired temperature
position.
Contact the Customer Service
Team and 1-855-HD-Glacier for
assistance.
Replace or lubricate the car-
tridge.
Tabla de contenido
loading

Este manual también es adecuado para:

F1aa0005ob1000 029 9631000 029 9671000 029 968

Tabla de contenido