Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- 4 operating programs.
- Time band programs with different modes:
- Different programs for each day of the week.
10. OPERATION AS PART OF A HOME AUTOMATION NETWORK
Select the
mode. While this mode is active, the appliance executes the
orders it receives from a home automation controller. Important: when the
appliance is in
to
.
11. DISCONNECTING THE APPLIANCE FROM THE POWER SUPPLY
ATTENTION: It must be taken into account that with the circuit breaker
switch on and/or the plug connected, the device is live (operational).
The device in "heating function off" position is not disconnected from the
electrical current.
If the radiator is going to be out of use for a long period of time, it is
recommended to disconnect the device completely. To do this, press the
mechanical switch on the rear of the control pad (with the red part not
showing).
Additionally, it would be advisable in these cases when it is going to be out of
use for long periods, to disconnect the corresponding circuit breaker, or to
unplug the cable if it has a plug.
In this position there is no electrical current and the LCD screen is completely
off. All the configuration, temperature and programming selections remain
unchanged.
12. IN THE EVENT OF POWER OUTAGE
The device will stop working and will reconnect when the electricity supply is
resumed. All selections remain unchanged. Thanks to its internal battery, the
clock will continue working, without displaying anything on the screen, For at
least two months.
13. OVERHEATING PROTECTION
This appliance is designed to transmit heat by convection and radiation. It will
be unable to operate properly if covered - totally or partially - by clothes or
other objects. Covering the appliance can also cause it to overheat. However,
the appliance features a safety cut-off mechanism which switches it off in the
mode but not receiving a home automation signal it returns
,
,
, STOP
20
Capítulos
Tabla de contenido
