Steam Ironing; Dry Ironing; Spray Function - Termozeta Milord7800 Proffesional Libro De Instrucciones

OPERATING INSTRUCTIONS
• Check that the steam adjustment command (4) is in the position of dry ironing (see
chart A).
• Completely unroll the feeling cable (7), put the iron in a vertical position and connect
the plug to the current socket.
•
With the temperature adjustment knob (9) select the temperature suitable for the
type of fabric to iron (see chart B).
• Thermostat indicator (8) switches on and will switch off when the plate has reached
the selected temperature. At this point the iron is ready for use.
ADVICE:
• Iron firstly more delicate fabrics which require low temperature and then more resistant
ones which require higher temperature;
• Before starting with ironing pass the iron over a small internal area of your item of
clothing to make sure that the selected temperature is suitable for that type of fabric.

STEAM IRONING

• Fill the tank with water.
• Through the steam adjustment command (4) choose the desired steam supply (see
chart A).
NOTE:
• When the iron is placed vertically during the ironing pauses the steam supply is
automatically cut off.
• When used for the first time, some water drops can come out together with the
steam. This is to be considered normal. Before ironing you clothing do some tests
on an old cloth.

DRY IRONING

• Put the steam adjustment command (4) in position of dry ironing.

SPRAY FUNCTION

• This function allows to wet the clothing during both steam and dry ironing.
• To activate it push several time the spray button (6) e direct the water jet onto the
most resistant creases.
SUPER-STEAM FUNCTION
• Push several the super-steam button (5): the iron will supply an instantaneous high
power steam jet.
NOTE:
• Don't consecutively push the button too many times to avoid coming of non steamed
ENGLISH