System Requirements - TrekStor DataStation pocket g.u Manual Del Usuario

OPERATING INSTRUCTIONS
Thank you for buying the TrekStor DataStation. We are confident that this product will be the source of much enjoyment.

System requirements

Windows® Vista, XP, 2000, ME, Mac® OS X:
No additional drivers are necessary for these operating systems. If you use Windows® 2000, make sure that you have installed at
least service pack 4; Windows® XP requires service pack 2 or above.
1) Startup
Use the provided USB Y-connection cable to connect the DataStation to your PC. Connect both USB A-plugs to the USB ports of
your PC and then the mini-USB A-plug to the DataStation. Your operating system will automatically recognize the DataStation,
and add the DataStation as a "l
OS X and Linux®).
Note: If only one free USB port is available in your PC or notebook, please proceed as follows:
1) Connect the USB plug (1) to the power supply with a USB charger (such as a TrekStor USB
charger e.f. which can be purchased separately) or an active USB hub.
2) Next, insert the USB plug (2) for data transmission into your PC or notebook.
3) Plug the mini-USB plug (3) into the DataStation.
Note: TrekStor strongly recommends that customers always insert both USB plugs.
Make sure that your PC or notebook offers sufficient power (500 mA) at both USB ports.
Insufficient power which may occur when only one plug is inserted can cause data loss
or even mechanical failure of the hard disk. TrekStor assumes no liability or warranty
for damage to the DataStation arising from insufficient power.
" (or "l ") to "m
oCAl Disk oCAl Drive
"/"C " (Microsoft® Windows) or the "D
y Computer omputer
– 9 –
EN
" (Mac®
esktop