System Requirements - TrekStor DataStation pocket click 3.0 KIT Manual De Instrucciones

OPERATING INSTRUCTIONS
b
Thank you for buying the TrekStor DataStation. We are confident that this product will
be the source of much enjoyment. Please read the following instructions carefully so
that you can become acquainted with the functions of this product and its use.
Current product information can be found at the TrekStor Website www.trekstor.de.

System requirements

For data transfer with a computer
• Windows® 7/Vista™/XP, Mac® OS X
For these operating systems, no drivers are necessary for the operation of the
i
DataStation in the USB mode. If you use Windows® XP, make sure that you have
installed at least service pack 2.
• Free USB port (USB 1.1, Hi-Speed USB 2.0 or SuperSpeed USB 3.0)
For data transfer via SuperSpeed USB 3.0
• Current operating system with installed support for USB 3.0.
Please note that the drivers for the USB 3.0 port are not automatically installed
i
with all operating systems. If you have any questions about the installation of
these drivers, please contact the manufacturer of your computer or of the used
USB 3.0 interface card.
• Free USB 3.0 port
Important information about this DataStation
This DataStation is a KIT version, i.e. it is a version without a preinstalled 2.5" hard drive.
Instructions for the installation of a hard drive can be found in this manual.
Hard drives can be seriously damaged by electrostatic discharges. It is necessary that
a
you touch a grounded piece of metal (e.g. a heating or water pipe) before you take the
hard drive out of its ESD bag!
Important information about SuperSpeed USB 3.0
A SuperSpeed USB 3.0 interface makes possible an extremely fast access to your DataStation.
In practice, a data transfer via USB 3.0 can be about four times faster than via Hi-Speed
USB 2.0. This means minimized waiting times for you and thus more time for all tasks
that are important to you.
EN
11