TrekStor DataStation pocket g.u Manual Del Usuario página 12

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
EN
Instructions for safety and use:
Only qualified persons may perform technical work on the product.
The product may not be opened or changed. The components cannot be serviced by the user.
Never expose the device to moisture, condensation and liquids. Protect the device from extremely high and low temperatures and temperature fluctuations.
Use the device within an ambient temperature of 10º C to 40º C.
Never place the device close to a source of heat, and protect it from direct sunlight.
Make sure that the surroundings are as dust-free as possible when you use and store the device.
Never clean the surface of the device with solvents, paint thinners, cleansers or other chemical products. Instead, use a soft, dry cloth or soft brush.
Note:
Do not use USB cables longer than 3 meters.
In certain circumstances, exposing the device to an electrostatic discharge may interrupt the data transfer between the device and the computer and impair
the functions of the device. If this occurs, the device should be unplugged from the USB port and then plugged in again.
The manufacturer retains the right to continually improve the product. These changes may be made without being directly described in these
operating instructions. For this reason, the information provided in these operating instructions may not reflect the current state of the art.
The manufacturer only guarantees suitability for the product's intended purpose. In addition, the manufacturer is not responsible for damages or loss
of data and subsequent consequences.
Copyright © 2008 TrekStor GmbH & Co. KG. All rights reserved. Other cited product or company names may be trademarks or brand names
of the respective owner.
– 12 –
Tabla de contenido
loading

Tabla de contenido