Makita DUR182L Manual De Instrucciones página 11

Installing the guard
WARNING:
Never use the trimmer without the guard in
•
place. Failure to do so can cause serious personal
injury.
013813
2
013839
Align the protrusions on the protector with the grooves
of the motor housing.
1
2
013838
Align the protrusions on the protector holder with the
concave portions of the motor housing. Insert the
protector holder to the motor housing.
1
014185
After attaching the protector and the protector holder to
the motor housing, tighten the hex bolts securely.
1. Grooves
2. Protector
1
1. Concave
portions
2. Protector holder
3. Protrusions
3
1. Hex bolts
Installing the wire guard
CAUTION:
Before adjusting the wire guard, wait for the
•
cutting head comes to standstill. Do not adjust the
wire guard with your foot.
013843
To reduce the risk damaging the objects in front of the
cutting head, insert the wire guard so that it controls the
cutting range of the mowing line.
1
013841
Slightly expand the wire guard outward and then insert it
into the holes of the protector.
NOTE:
Do not expand the wire guard outward too much.
•
Otherwise it may break.
013842
When wire guard is not in use, lift it for the idle position.
Installing nylon cutting head
NOTICE:
Be sure to use genuine Makita nylon cutting head.
•
Turn the tool upside down so that you can replace the
nylon cutting head easily.
11
1. Holes
2. Wire guard
2