Charge Level Display; Installing The Battery - Specialized Bicycle Components VADO Serie Traducción De Las Instrucciones Originales

The charge level of the battery is permanently displayed during your ride. The number of LEDs glowing will indicate
the remaining battery charge (fig.9.3).
At 10% battery charge remaining, the system will start to reduce the amount of support. At 1%, the system switches
off the motor support.
If your bicycle is at a standstill for at least 10 minutes, the Battery Management System will switch the system off. In
order to continue riding with support, you have to switch the system on again.
9.3
9.4
CAUTION: ALWAYS
TURN OFF THE
BATTERY BEFORE
INSTALLING OR
REMOVING!
Lower the bottom edge of the battery into the bottom of the battery cavity (fig.9.4), then align the top of the
„
battery with the top of the cavity.
The key does not need to be in the lock to install the battery. The battery will lock in place
automatically when installed. The key is required only to remove the battery.
19

9.3. CHARGE LEVEL DISPLAY

9.4. INSTALLING THE BATTERY

BATTERY
CONNECTOR
80-100%
60-79%
40-59%
20-39%
0-19%