System Interface; Support Modes - Specialized Bicycle Components VADO Serie Traducción De Las Instrucciones Originales

The VADO and COMO models are equipped with an LCD display.
WARNING! Use caution when viewing or using the display while riding, as it can be distracting and
can lead to accidents. You should always stop before changing settings or operating the various
functions of the display.
The handlebar remote (fig 8.1) controls certain functions of the display and the level of motor support.
8.1
25 km/h: LIGHT ON / OFF
L1e-B: HIGH BEAM ON / OFF
SET BUTTON: Allows for the user to toggle through the pages (trip distance, state of charge, ride time and
„
odometer).
+ BUTTON: Increases the amount of support. Pressing and holding activates the walk-assist mode.
„
- BUTTON: Decreases the amount of support. Pressing and holding for 2 seconds resets the day trip.
„
LIGHT: Turns the light on/off (25 km/h or 20 MPH USA models) or sets the high beam on the L1e-B.
„
HORN: Sounds the horn while pressed.
„
The light/horn spec may vary depending on the bike model and country requirements.
The front light on the L1e-B turns on automatically when the bicycle is turned on and cannot be
turned off.
The VADO motor offers five different drive settings. TURBO,
SPORT, ECO, OFF and SMART CONTROL.
TURBO MODE: Maximum power mode for high speed
„
sections and climbing.
SPORT MODE: Maximum control, with sufficient power
„
on demand.
ECO MODE: Most efficient mode for maximum range while
„
offering good power.
OFF MODE: The motor will not offer any assistance, but
„
the display and lights will still function.
SMART CONTROL MODE: The motor, while pedaling,
„
adjusts the power output based on the ride parameters
determined in the Mission Control App.
The various modes are managed using the +/- buttons on the
remote (Fig 8.1), and displayed on the TCD (Fig 8.2).

8. SYSTEM INTERFACE

SET
+
-

8.1. SUPPORT MODES

8.2
L1e-B: HORN
TURBO
MODE
SPORT
MODE
ECO
MODE
OFF
MODE
SMART
CONTROL
10