Inserting/Replacing The Filter; Inserting/Removing The Portafilter - Silvercrest SEM 1050 A1 Instrucciones De Servicio

2. Place the drip grid 14 on the drip
tray 12 so that the small round hole is
over the float 11.
9.3 Inserting/replacing the
filter
Your espresso machine comes with two fil-
ters:
Filter for single
espresso 2
Observe the following markings when in-
serting:
- Both filters 1/2 have a notch 21 in the
upper edge and a nub 20 underneath.
The filter 2 has a second nub on the op-
posite side so that it does not fall out of
the portafilter 19.
- There is a notch 18 in the edge of the
portafilter 19.
1. Select the desired filter 1 or 2.
60 GB
Filter for double
espresso 1
2. Insert the filter 1/2 in an inclined man-
ner into the portafilter 19 so that the
notch 21 and the notch 18 are on top
of each other. Press the filter down and
turn it a little in the portafilter so that it
cannot fall out.
21
20
18
NOTE: as the filter 1 has only one nub 20,
it can also be inserted straight into the por-
tafilter 19.
To remove the filter 1/2 from the portafil-
ter 19, turn the filter such that the two notch-
es 21 and 18 are on top of each other again.
The filter can be removed in this position.
9.4 Inserting/removing the
portafilter
Inserting:
1. Insert the portafilter 19 with the handle
at the symbol
2. Turn the handle of the portafilter 19 to
the right as far as the symbol
16.
15.