Advanced Setup - User Password - Sanyo POA-WL11 Operación Manual

4.3.6. Advanced setup – User Password
On the user password setup screen of the advanced setup, the user password can be set, which is used
when using WI Client.
[NOTE] By setting a user password, you can restrict access to the Wireless Imager.
The user will be prompted to enter a password, when accessing Wireless Imager via WI
Client.
When setting the user password, always record the user password you have set.
It is possible to set the user password different from the Admin Password.
You can assign respective user password for LAN 1, LAN 2, and LAN 3 configuration set.
Parameter
Enter New User Password
Re-enter New User Password
[NOTE] When setting the user password again, the current user password is not necessary.
Changing of the user password is protected by the administrator password. When setting
the user password, it is recommended to set the administrator password.
If the contents you have set on this page are correct, click the [APPLY] button.
The screen showing that the password has been updated will appear. Click the [BACK] button.
Chapter 4.
Input a new password you wish to set. The password you have
input is shown like "●●●●●●●".
Re-enter the new password you wish to set. The password you
have input is shown like "●●●●●●●".
— 41 —
Setting up Wireless Imager
Description