Schüco IPE 2700 SN 05 Manual Del Usuario página 48

Commissioning
Later commissioning
44
NOTE
The data for the slaves can be assigned in the browser and in the menu of the master
based on the IDs.
The CAN-ID 1 is automatically assigned to the master. This means the slaves can
be assigned IDs from 2 to 99.
Commissioning cannot be continued until after an ID has been requested from the
master.
2. Completion of commissioning
Confirm overview with
3. Commissioning of all other slaves as described above
If you add new units or replace existing ones in your solar system, then you can dis-
play the unit list in the display on the master under Settings - Network - CAN bus.
The new unit can then be put into operation in accordance with the description for
commissioning slaves.
.
IPE 2700 - 5000 SN 05