Tabla de contenido
2. Microphone input
(MVH-8250BT only)
4 m
4. Wired remote input
Hard-wired remote control adaptor can be connected
(sold separately).
27. Connection method
1. Clamp the lead.
Note:
· The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner's Manual or dealer.
28. Light green
Used to detect the ON/OFF status of the parking
brake. This lead must be connected to the power
supply side of the parking brake switch.
32. Blue/white
Connect to system control terminal of the power amp or
auto-antenna relay control terminal (max. 300 mA 12 V DC).
33. With a 2 speaker system, do not connect anything to the speaker
leads that are not connected to speakers.
34. Note:
· Change the initial setting of this unit (refer
to the Operation Manual). The subwoofer
output of this unit is monaural.
3. Microphone
(MVH-8250BT only)
29. Power supply side
31. Ground side
2. Clamp firmly with
needle-nosed pliers.
30. Parking brake
switch
<CRD4475-A> <18>
Fig. 10
圖10
Tabla de contenido
